85 Ton SCOTCHMAN IRONWORKER , VERY NICE, EXCELLENT CONDITION
IRONWORKERSPunching Capacity 85 ton
1-1/16" in 1" 77 mt
27 mm in 25 mm
Special Tooling 4" Max. Dia. 102 mm Max. Dia.
Throat Depth 14" 355 mm
Flat Bar Shear 20" Length
1" x 14"
3/4" x 20" 508 mm
25 mm x 355 mm
19 mm x 508 mm
Angle Shear 90 degree 6" x 6" x 1/2" 152 mm x 152 mm x 12 mm
Angle Shear 45 degree
(w/Bar Shear) 4" x 4" x 1/2" 102 mm x 102 mm x 12 mm
Brake 12" 85 ton 77 mt
Brake 24" 85 ton 77 mt
Open End Brake
(Notcher Station) Max. 1/2" x 6"
[Flat or Angle Iron] 12 mm x 152 mm
Open End Brake
(Punch Station) Max. 1/4" x 5"
[Flat or Angle Iron] 6 mm x 127 mm
Pipe Notcher
Schedule 40 3/4", 1", 1-1/4", 1-1/2", 2"
Rectangle Notcher 2" x 4" x 1/2" 51 mm x 101 mm x 12 mm
90 degree V-Notcher
(Punch Station) 6" x 6" x 5/16" 152 mm x 152 mm x 8 mm
90 degree V-Notcher
(Notcher Station) 3" x 3" x 1/2" 76 mm x 76 mm x 12 mm
Punch Attachment
(Notcher Station) 50 ton
1-1/4" in 1/2"
32 mm in 12 mm
Throat Depth w/Punch Attachment
(Notcher Station) 4-7/16" 113 mm
Channel Shear 2" to 6" 51 mm to 152 mm
Unistrut Shear Samples Required
Rod Shear
Round (max.)
Square (max.)
4 Cavity - 1/2", 3/4", 1", 1-1/2"
1 Cavity - 1-1/2"
12 mm, 19 mm, 25 mm, 38 mm
38 mm
Square Tube Shear 1/2" to 2"
12 gauge 12 mm to 51 mm
0.105" / 2.7 mm
Picket Tool 1/2", 3/4" & 1"
16 gauge 12 mm, 19 mm, 25 mm
0.06" / 1.5 mm
Weld Coupon Bender (max.) 2" wide x 3/8" 51 mm x 10 mm
Offset Die Holder Max. 40 ton Max. 36 mt
Strokes per Minute in Light Material 45 spm [Punch Station] 1/4" Stroke
Strokes per Minute in Heavy Material 18 spm [Punch Station] 3/4" Stroke
Hydraulics 3,350/3,800 psi 231/262 bar
Motor Standard 10 hp
208/230/460, 380/575v; 3 ph 7.46 kW
Motor Optional 10 hp
220v, 1 ph 7.46 kW
Dimensions L: 77-1/2"
W: 32-1/4"
H: 74" L: 197 cm
W: 82 cm
H: 188 cm
Shipping Weight (may vary) 5,504 lbs 2,497 kg
Tonnage | 85 T |
Angle (L1) | 6" |
Angle (L2) | 6" |
Angle (T) | 0.5" |
Power | 10 hp |
Throat | 14" |
Dual Operator, 5 Stations
Dual operator allows for two operators to work at the same time at full capacity
85 Ton punch station
Keyed punch ram for safety
Punch gauging table with fence and scale
Die holder complete with 2" die insert
Punch nut with wrench & stripper
Adjustable swing-away stripper
One round punch & die: max. diameter 1-1/4"
Punch jog control
Two adjustable electric stroke controls with scale
Two electric remote foot pedals
Tandem Hydraulic Pump
Two valves
Slug-less angle shear
Rectangle notcher: can be converted to a V-notcher, 50 ton punch station, or open end brake
Flat bar shear
Shear table with miter fence
Rod shear
Slug receptacles
Electrical box supplied with emergency palm button and lock-out tag-out accommodations
All guards necessary to comply with ANSI