THERMAL DYNAMICS PAK MASTER 150 XL PLASMA MACHINE W/ HAND HELD TORCH
Plasma Welders
Cut Capacity: 1-1/2” (38mm) Genuine Cut
1-3/4” (45mm) Severance
1” (25 mm) Pierce Capacity
Output Current: 30-120 Amps, Adjustable
Input Power: 208-230/460 VAC, 3ph, 50/60Hz,
78/74/37 Amps
220/380-415 VAC, 3ph, 50/60Hz,
75/44/40 Amps
Duty Cycle: 60% @ 120A, 100% @ 100A
Dimensions: Length 35” (889mm)
Width 24.5” (622mm)
Height 45.4” (1153mm)
Weight: 275 lbs. (126 kg)
Ship Weight: 377 lbs. (171 kg)
Panel Controls: On/Off Switch, Run/Set/Latch Switch,
Output Current Potentiometer
Panel Indicators: AC Power, DC Output, Temperature,
Gas Pressure
Work Cable: 20 ft. (6.1m) (includes clamp)
Input Power Cable: Refer to Following Options
Plasma Gas: Air, Nitrogen, Argon/Hydrogen
Pressure: 65 psi (4.5 bar)
Flow: 45-85 scfh (21-40 lpm)
Secondary Gas: Air, Carbon Dioxide, Nitrogen
Pressure: 60 psi (4.1 bar)
Flow: 340 scfh (160 lpm)
Total Flow: 426 scfh (200 lpm) Max.
Gas Supply
Connections: Inert “B” on rear panel
(plasma and secondary shop
air filter/regulator with “Y”
hose provided)
Pilot: Electrode to Tip
Control: Hand Torch Switch, Hand Pendant,
or Interface Cable
Torch Configurations
Torch: PCH/M-120
Hand: 70° or 90° Head
25 ft. (7.6m) or 50 ft. (15.2m) Leads
Machine: 180° Head
25 ft. (7.6m) or 50 ft. (15.2m)
Shielded Leads
Warranty: Limited Warranty; 2 yr. Power Supply,
1 yr. Torch
Certifications: IP-23C (water test), CSA,
| AMP | 35 A |
Cut Capacity: 1-1/2” (38mm) Genuine Cut
1-3/4” (45mm) Severance
1” (25 mm) Pierce Capacity
Output Current: 30-120 Amps, Adjustable
Input Power: 208-230/460 VAC, 3ph, 50/60Hz,
78/74/37 Amps
220/380-415 VAC, 3ph, 50/60Hz,
75/44/40 Amps
Duty Cycle: 60% @ 120A, 100% @ 100A
Dimensions: Length 35” (889mm)
Width 24.5” (622mm)
Height 45.4” (1153mm)
Weight: 275 lbs. (126 kg)
Ship Weight: 377 lbs. (171 kg)
Panel Controls: On/Off Switch, Run/Set/Latch Switch,
Output Current Potentiometer
Panel Indicators: AC Power, DC Output, Temperature,
Gas Pressure
Work Cable: 20 ft. (6.1m) (includes clamp)
Input Power Cable: Refer to Following Options
Plasma Gas: Air, Nitrogen, Argon/Hydrogen
Pressure: 65 psi (4.5 bar)
Flow: 45-85 scfh (21-40 lpm)
Secondary Gas: Air, Carbon Dioxide, Nitrogen
Pressure: 60 psi (4.1 bar)
Flow: 340 scfh (160 lpm)
Total Flow: 426 scfh (200 lpm) Max.
Gas Supply
Connections: Inert “B” on rear panel
(plasma and secondary shop
air filter/regulator with “Y”
hose provided)
Pilot: Electrode to Tip
Control: Hand Torch Switch, Hand Pendant,
or Interface Cable
Torch Configurations
Torch: PCH/M-120
Hand: 70° or 90° Head
25 ft. (7.6m) or 50 ft. (15.2m) Leads
Machine: 180° Head
25 ft. (7.6m) or 50 ft. (15.2m)
Shielded Leads
Warranty: Limited Warranty; 2 yr. Power Supply,
1 yr. Torch
Certifications: IP-23C (water test), CSA,
